Advantages of automated warehouse1.

Warehousing logistics refers to the bulk storage of bulk substances and commodities on a pallet foundation in massive warehouses. Among them, automatic warehouse adopts mechanized operation and records scheduling, which is an superior warehousing mode broadly diagnosed by means of the society and is extensively used in agency completed product warehousingThe completed product warehouse of the business enterprise is linked with the manufacturing workshop thru the air transmission line.

Hand Use Stretch Film Specification:Specification/ModelWidthThicknessNet weightPaper Core Inner DiameterSFM-1350500mm0.013mm15.00kg76mmSFM-1750500mm0.017mm15.00kg76mmSFM-2050500mm0.020mm15.00kg76mmSFM-2250500mm0.022mm15.00kg76mmSFM-2550500mm0.025mm15.00kg76mmSFM-2850500mm0.028mm15.00kg76mmSFM-3050500mm0.030mm15.00kg76mmLLDPE  MaterialMachine se stretch film produced from ExxonMobil Chemical Exxon and Dow Chemical Dow Imported linear Low_ Density Polyethylene (LLDPE) resins and Metallocene raw material.Warehouse of our stretch film:We have our own Large clean warehouse

Horizontal Full Automatic Strapping Machine for Pallet is a strapping machine at one head appositively planned to a complete automation of the packaging lines. It is made with strong and heavy duty columns and has been appositively studied to allow a complete automation of packaging lines for food industries. It allows in the same time the strapping cycle.  Parameters Of Horizontal Strapping Machine headingStrap P.E.T.Useful dimensions Width:16mm., thickness:0,6 – 0.9mm.Inside coil diameterInner core diameter 406 mm.

Horizontal Full Automatic Strapping Machine for Pallet is a strapping machine at one head appositively planned to a complete automation of the packaging lines. It is made with strong and heavy duty columns and has been appositively studied to allow a complete automation of packaging lines for food industries. It allows in the same time the strapping cycle.  Horizontal Pallet Full Automatic Strapping Machine  Strap P.E.T.Useful dimensions Width:16mm., thickness:0,6 – 0.9mm.Inside coil diameterInner core diameter 406 mm.

DESCRIPTION Of Horizontal strapping machine  :Pallet dimensions :1290 x 1290x150 mm.Load dimensions: 1200 x 1200 mm.Pallet height: Min.1049mm including pallet heightPallet weigh: 1200kg/palletConveyor height: 200mm. (chains conveyor)Strapping pattern: horizonltalProduct strapped:  Metal bucketProduction capacity :120Pallet/hour-2pcs stap in one pallet materials SOLUTION For Horizontal strapping machine :It is a strapping laptop at one head appositively deliberate to a entire automation of the packaging lines.

Automatic product carton positioning. Automatically lift the carton outward and inner bag after packing, and automatically press the carton into the carton by folding it in half in both directions. Realize automatic output for easy box sealing. Realize unmanned assembly line equipment, improve work efficiency, reduce labor, and improve customer production technology and automation. This machine adopts P.L.C+ display control, which greatly facilitates operation, management, reduces production personnel and labor intensity, and is an indispensable equipment for automated large-scale production.

Features of automatic scissors lifting platform:1. The anti-skid steel plate on the platform surface can be extended, and the steel pipe guardrail with strong bearing capacity can be folded by itself without tools.2. The use of maintenance-free lifting arm sleeve, powder coating and nickel-plated bolt pin increases the wear resistance of the shaft pin and prolongs the service life of the lifting platform.3. Low noise can enable the operator to operate in a quiet working environment, and the large-angle steering system provides face-to-face maneuverability.4.

Control System of Pre-stretched Drip Tape Cylinder Type WrapperProgram control unit integrated machine;counts of wrapping can be set ,Separate top,bottom and up-down wrap count selectors;Reinforcement of winding function, can give special protection to certain;Film carriage of Pre-stretched Drip Tape Cylinder Type WrapperPowered pre-strech system up to 250% to min film consumption Carriage lifting motor：Motor power ：    0.37kwMain configurations of Pre-stretched Drip Tape Cylinder Type WrapperMotor: Gale 85SZDPLC Programming

1. Main technical parameters of Aerial work platform/Auto scissors lift:No.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor (V/kw)24/4.521Ma

Roller Conveyor Trolley (Rail-guided Vehicle) requirements:Table height: subject to negotiation between the two partiesApplicable power supply: 380VLoad capacity: 1500kgDevice Description:Rail drive motor power: 1.5kwConveying motor power: 1.1kwRoller machine effective width: 1200mm Trolley roller machine length: 1485mm (speed frequency conversion adjustable, wheel inside with rubber)Effective width of trolley: 1200mm Trolley track length: 13291mm The motor of the roller conveyor and the motor of the trolley need to have brakesProduction Effect Pictures for Roller Conv

Production Instruction of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor：1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor:1. The central frame is welded with carbon steel (5mm thickness). The external conveyor chain frame is installed from the top by the center frame to the bottom.2.

Operation process of Automatic Hydraulic Press Made In China For Sales: Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lif

Lifting Equipment for Fully Automatic Unmanned Reciprocating Vertical Lift Conveyor:This full automatic unmanned heavy loading type vertical lifting conveyor is appropriate to lifting cartons, woven bags, plastic barrels and different merchandise up and down vertically.1 The fundamental frame1 Material: 80*80mm aluminum alloy profiles, linked and assembled by means of screwstwo Protective screening: exterior body adopts obvious natural glass2 Conveying system1 The most important chain makes use of carbon metal 16A-1 curler chain whose pitch is 25.4mm with W-2 bending plates bilaterally.two The

Workflow of Automatic Belt Conveyor For Gypsum Lines Or Long Wire Plate：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packaging machine for packagin

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

Packaging & Delivery of 12um Plastic Stretch Film:Specification of 12um 15kg/Roll Stretch PE Film：MaterialLLDPEWeight15KGWidth500mmThickness12micronColortransparentHardnessSoftFeatureMoisture ProofModel number12um*500mm*15KGPackingAccording to different specifications, We can provide carton size as your request.DeliveryDelivery within 30 days after receipt of depositPayment30% T/T payment in advance, 70% before shipment.Delivery Pictures of 15kg Machine Use PE Plastic Wrapping Film:We can customize according to your requirement. We can help you to save lots of cost and recommend

1. Outline of equipment Constructions of equipment are as follows.No.EquipmentQ’tyDescription1Robot1Without robot base2Standard Hand13Control box14Manual teaching box1With 10m cable5Emergency stop21 on control box and 1 on teaching box6Cable between control box and robot110m7Teaching memoryMax 120 blocks,90steps×90layers※Condition”blocks”×”steps”×”layers”≦45,0008External interlock signalsPlease refer to Interlock List in electrical drawings for the kinds. 2. General specificationsLayout type: Please refer to Layout Drawing attached.

Cheap Net Agriculture Stretch FilmMateriallldpeLength1200mWidth500mmTensile Strength25kgColortransparentHardnessSoftFeatureMoisture ProofModel number500mm*1200mPackingAccording to different specifications, We can provide carton size as your request.DeliveryDelivery within 30 days after receipt of depositPayment30% T/T payment in advance, 70% before shipment.Detailed requirement, please talk with us at any time.Any question or requirements, please contact with us at any time.AdyWhatsApp:+86 15634865861

Specification of Good Net/Reticulated Film For Packaging Agricultural Silage Stretch FilmWidth500mmLength3000mStyleCustomizedUsePackingImported raw materials(LLDEP)Our corporation makes use of imported linear low density polyethylene (LLDPE) raw material from ExxonMobil Chemical, Chemical, Dow Dow Chemical and different corporations to produce our wrap films. Imported LLDPE raw material have greater first-class requirements and extra stringent manufacturing processes, ensuing in greater reliability and sturdiness of our products.

PE Top Film Bottom Film Specifications:Material, name: PE covered filmFilm width: 1350mmThickness: 80 μm  Outer diameter: 260mm/350mmCore inner diameter: 76.2mm Single roll weight: 50kg/100kg (net weight)Material of PE Top Film Bottom Film :Polyethylene (PE) film    PE film has moisture resistance, low moisture permeability, is a blown film, thick texture, not easy to stretch and deform.Production process:Film blowing machine is a mechanical equipment that heats and melts plastic particles and then blows them into a film.

Commonly physical properties of Agricultural Using Porferated Stretch FilmTest itemUnitTest methodHand-wrapMachine-wrapPre-stretch wrapThicknessμThickness Gauge9-259-3012-30Haze%ASTM D10031.21.21.2Gloss60℃ angle%ASTM D523868690Tensile strengthKg/C㎡ASTM D882MD280↑350↑350↑TD200↑200↑200↑Elongation%ASTM D882MD400↑400↑500↑TD600↑650↑700↑Tear resistanceKg/cmvASTM D1922MD60↑90↑120↑TD120↑150↑200↑Pre-stretch ratio%ASTEM D4649--------------200↑Cling forceg/25cmSWANSON20-5030-6040-70Use for a large vary of applicationsOur wrap film are divided into a range of fashions in accordance to distinct utilization

Stretch Film Specifications of Portable Hand Held Film Puller:1. Hand mask2. The inner diameter of the paper core is 76mm3. Weight: 2-4kg4. Outer diameter of winding film: 140mm5. Stretch film width: 520mm (including core height, stretch film width 500mm)Portable Hand Held Film Puller requirements:1. Adjust the tension by damping pre-tension2. The weight of the film puller should be as light as possible3.

Package sizeLine 1 corresponding specifications (excluding pad height):MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H）Line 2 corresponding specifications (excluding pad height):MIN:609mm x 915mm x42mm（L x W x H）MAX:12192mm x 915mm x118mm（L x W x H）Stacker DescriptionStacking lifting chain conveyorStacking lifting position chain conveyor is composed of 1 set of 12 meters long four-row chain conveyor, the conveyor adopts heavy-duty square pipe welded frame, effective length 12000mm, effective width 1010mm, height about 600mm, speed 10m/min, SEW gearmotor, freque